Naturex

Frame + probes

VAT excluded

Price: 429,00 €


Quantity
  

New TriCore BDM frame with probes - nonanodized
ADAPTERS ARE NOT INCLUDED!!! Massive and strong aluminum 2019 series ultra quality Tricore BDM Frame that suits all your needs regarding flashing the ECUs. Arm and deck rotation. Flexible usage, lots of transforming possibilities.


No more wasting time with positioning the ECU. With 2019 series frame, high quality, massive and strong, aluminum Tricore BDM Frame, you can do almost everything what you ever needed when putting your ECU to the desk.


News, differences and lot of improvements. Flexibility, friendly handling, stable, very precise and good place adaptation.

What makes this tool different from other available tools? Why is this tool higher priced than some other available tools? Why should i decide to use 2019 series Tricore BDM Frame instead of cheaper tools? You will find all answers in the next 24 facts.

1. Easy and fast arm and top deck rotation
2. clear surface, friendly for cleaning
3. very massive and huge aluminum tool
4. ergonomic cut out edges for ideal arm position when making vertical movements
5. two axle design - stainless steel hard rods for perfect non sticky smooth movement
6. long vertical and horizontal movement, low minimum height point and high maximum height end point
7. intelligent transforming positions (for adapter using, for soldering, for programming probes using, for making more room on desk, for taking less room in workshop and for transportation)
8. independent all direction movement: up-down, in-out, left-right rotation. Any movement can be stopped/released – controlled; flexible usage
9. all movements are very precise
10. carefully calculated bearing and slider smoothness
11. carefully calculated arm weight for fast and simple usage
12. plexi/deck 180degree flip (plexi holder has 3 functions as holder and as tricore top deck plus illumination deck)
13. strong massive 10mm plexi glass ergonomically shaped with useful curves - useful non sharp cut outs
14. 12v led light on compact 10mm plexi top deck - great illumination, better view
15. two pockets for programming probes and other tools, positioned carefully for fast handling
16. better shaped ergonomic arms, slim, strong and very practical design
17. smoother running, precise movements and very precise pointing
18. rubber legs for good grip to prevent scrolling
19. each product is carefully inspected and tested
20. fast handling
21. user friendly screws position
22. better handling and view on ecu, user friendly stop screws for perfect usage, positioning and fast work
23. rubber shock and noise absorbers for silent and comfortable usage
24. all screws are carefully designed and produced

1. Specification:

General

Main materials: Aluminum (First grade / Class A), Stainless steel 52HRC
Size: L: 350mm X W: 295mm X H: 270mm
Weight: 9.3kg
Color: natural metal
Arm rotation: Yes
Top deck rotation: Yes - Fast Flip
Top deck material: Plexi, transparent, thickness 10mm
Package size: 400mmx400mmx350mm
Electrical conductivity: yes
Thermal conductivity: yes
Surface: clear natural metal
Maximum vertical movement: 110mm
Maximum horizontal (in/out) movement: 170mm
Maximum horizontal (left/right) movement: 180mm

!!! VERY IMPORTANT - READ !!!

3. Powering the led light:

Note that led light must be powered with 12V and maximum voltage must not go over 12.5V, even the light can handle over 13V. Do not tune it!

But keep in mind that going over 12V, will result to very very high temperatures that will melt down plastic, glue, soldered contacts and you can make fire and injuries of yourself or others!This led light is just for usage while connecting the contact to ecu and it is not meant as a non-stop light in workshop. So turn it off each tome when you finished connecting the contacts. Do not forget that! Never leave light turned on without control of the person who used it. Also very strong light can damage your eyes and you can burn yourself very hard. Powering is your own responsibility - totally. We are not responsible for any kind of issues direct or indirect regarding to using or powering the lights and using the electricity.

Informational data:

Proper voltage and normal usage:

Approx. Voltage: 11.5V 
Approx current consumption: 0,19A 
Approx temperature: 38degrees Celsius

Suggested usage:

Approx. Voltage: 12V 
Approx current consumption: 0.22A 
Approx temperature: 40degrees Celsius

Satisfied usage:

Approx. Voltage: 12.5V 
Approx current consumption: 0.38A 
Approx temperature: 59degrees Celsius(already hot)

Not recommended and no guarantee for long term usage, material changes can begin:

Approx. Voltage: 13V 
Approx current consumption: 0.40A 
Approx temperature: 61degrees Celsius

Do not try! No guarantee.

Approx. Voltage: 14V 
Approx current consumption: 0.61A 
Approx temperature: 100degrees Celsius(will permanently deform and damage materials and led light). Melt down can begin!!!

Do not try! No guarantee.

Approx. Voltage: 15V 
Approx power consumption: 1A 
Approx temperature: 170degrees Celsius(total meltdown.


Note that we designed special glue, ergonomic surface of Plexiglas and led holders for led that can indicate over voltage usage. So please do not over voltage it.

(NEVER PUT MORE THAN 12V AND TURN IT ON ONLY WHEN NEEDED, LIGHT IS HELPER ONLY WHILE CONNECTING AND IT IS NOT MEANT AS PRIMARY LIGHT IN WORKSHOP, IF YOU OVER VOLTAGE IT,  IT WILL OVERHEAT AND CAN MELT DOWN GLUE AND FALL DOWN, YOU CAN ALSO BURN YOURSELF, ALL RESPONSIBILITY IS FROM OPERATOR WHO PUTS POWER TO THE LED LIGHT, NEVER LEAVE IT TURNED ON WITHOUT CONTROL)


4. Usage tips by steps:

  1. stop arm in a suitable angle and length
  2. while vertically approaching ecu - move ecu and not arms, that way you will be very fast and more precise
  3. when you press the pogopins to the ECU, you can use only the weight of the arms without pressing it more towards ECU, as arms are heavy enough to make perfect contact in most cases, but if you do wish to press more towards ECU, lock the horizontal movement on the both sides at the same moment  - not only on one side!

5. Hints:

  1. use only one dimension movement at once, keep other movements blocked with all available screws
  2. while connecting use only vertical movement
  3. always move ecu left/right, in/out and move arms up/down
  4. when connecting to ecu keep rotation / horizontal movement blocked

6. Package content:

A) 2019 series TriCore BDM frame

B) Programming probes

- 8 new generation aluminium programming probes with strong golden pogopin
- 8 quality  jumper wires for making a connection with probes and programmer
1 white distancer for making proper distance for positioning probes
- 8 golden pins for jumper cables
wide angle of positioning due to strong silicon grip caps
- supports stable and precise connection regarding to ergonomic shape
- supports stable and reliable connection with precise golden pogopins
- very good impact resistance and nice handling
- clear view of the ECU connection pads simplifies work
- rubber cap for very good grip
no minimum distance limit between programming probes

- unpressed probe length: 110mm
- completely pressed probe length: 103mm
- minimum distance between pogo tips: no limit just do not short circuit it
pogopin diameter: 1.3mm

- full package weight: approx. 100g

full package dimension: 18cm x 12cm x 10cm
package color: white


- 8x probes
- 8x jumper wire, premium Female/Female
- 8x male pin for connecting to crocodile clips
- 1x distancer

We do not take any responsibility (direct or indirect) for damages on your ECU by wrong usage, mistakes, accidents or any kind of interrupts, interference or coincidences (predictable or not predictable).
How ewer, our products are high quality products that will satisfy your needs and standards. Use it with care any you will never have problems.